Product Description
Netgear ProSafe Smart Switches are designed for growing businesses that want control over their network without the cost and complexity. Choose to plug in up to 24 Ethernet or Fast Ethernet devices and mix in up to 24 802.3af IP-based devices. Power-over-Ethernet (PoE), optimizes the installation and power management of network devices such as wireless access points (AP), Voice over IP (VoIP) phones, and IP-based surveillance cameras. This PoE-capable Smart Switch, the FS728TP, provides power and data using built-in IEEE 802.3af PoE on all 24 ports. In addition, the FS728TP offers an intuitive Web-based management tool for quick and easy deployment and configuration making it ideal for deploying access points, VoIP phones and IP-based surveillance cameras. With the utility of 24 10/100 Mbps ports, two copper 10/100/1000 ports and two combination copper/hot-swappable small form-factor pluggable (SFP) Gigabit ports, growing business networks, classrooms and workgroups can benefit from superior performance and keep up with expanding network needs. This high-performing switch features non-blocking wire-speed architecture with a 12.8 Gbps switching capacity for maximum data throughput. Buffer memory - 3 Mb per system Addressing - 48-bit MAC address Mean Time Between Failure (MTBF) - 300,000 hours (~34 years) Acoustic noise - 49 dB Dimensions - Width 17.3 x Depth 8.1 x Height 1.6 (440x205x43mm) Weight - 8.8 pounds (4.0 kg)
Customer Reviews:
Netgear FS728TP Review.......2007-10-15
With traffic on networks increasing and new devices being regularly added, you need a network switch that will not only cope with your current demmand, but will also be futureproof. The FS728TP does all that. With power over ethernet it can provide power to voice over IP phones on your network, remote webcams, etc therefore removing the need for local power sources for them.
This really is a switch that suits all users - from the basic user this is effectively plug and play - just connect your devices and it works out of the box. With other more advanced features such as QoS, SNMP, Web based configuration & DHCP it offers plenty of configurability for the more advanced user as well.
All in all, this is a great value for money switch with the performance and reliability that Netgear are known for. A highly recommended product!
Product Description
Features: - Ideal for Integrating Your 10BaseT and 100BaseTX Network Hardware - 24 10/100 Ports Provide Dedicated Bandwidth in Half/ Full-Duplex Modes - Switched 10/100 Ports Run at up to 200Mbps in Full-Duplex Mode - Each Port Supports Auto MDI/MDI-X Cable Detection - Compatible with All Major Network Operating Systems - Advanced Store-and- Forward Packet Switching Optimizes Data Transfers - Auto Partitioning Protects PCs from Downed Network Lines - Signal Regeneration Ensures Data Transfer Integrity - Limited Lifetime Warranty
--Standards IEEE802.3 and IEEE802.3x --Protocols CSMA/CD --Ports 24 10/100 RJ-45 --Speed 10/100Mbps --Cabling Category 5 Ethernet or Better --Topology Star --LEDs System, 1 through 24 --MAC Address Table : Supports 4K MAC addresses --Switching Method Store-and- Forward --Power 12.5 W Internal 100 V ~ 240 VAC --Humidity 20% to 95%, Non-Condensing --Operating Temperature 0 to 50 (32 to 122)
Product Description
The NETGEAR FS728TP, 24-Port 10/100Mbps Switch w/PoE, 2-Port 10/100/1000Mbps plus 2 Combo Gig/SFP Slots. The NETGEAR FS728TP, 24-Port 10/100Mbps Switch w/PoE, 2-Port 10/100/1000Mbps plus 2 Combo Gig/SFP Slots.
Product Description
For over 100 years, what has remained constant is GE's dedication to change and progress. And that's what will keep the company growing over the next 100 years. From jet engines to power generation, from financial services to plastics, from television to medical imaging, GE people worldwide are dedicated to turning good ideas into products and services that make the world a better place.
Customer Reviews:
Much better than the 3 prong approach.......2007-10-20
Swapping the old 3 prong cable for this 2 prong with the S-Cable connection was a great idea. Really cleaned up the image from our older satellite box! Totally worth doing and this cable is a bargain at $14!
Why pay more?.......2007-03-28
This cable is well shielded and the connectors solid. The cable is very flexible and not too thick, making it easy to snake through a spine. An excellent buy.
Product Description
Belkin offers industry-leading, open 2-Post Racks that provide an economical, stable, and durable solution for securing patch panels, switches, cabling, and other rack-mountable networking equipment.PRODUCT FEATURES: 19" x 4' durable frame; RMU markings on both sides for fast and simple equipment installation; Highest-quality construction and craftsmanship; Easy, one-person assembly.
Product Description
The Visioneer Strobe XP 300 is a reliable duplex scanner for the office, on the road or at home. Measuring only 2" x 2.5" x 12" and weighing a mere 20 ounces, the Strobe XP 300 is slim and lightweight. It fits neatly on a desk and packs easily alongside your laptop or in a briefcase for travel. Scans anywhere because it is powered through the USB port, or choose wall-powered mode to conserve your laptop battery. Now you can quickly scan, file and store all of your documents, plastic ID cards, photos, articles, brochures and business cards no matter where you are.The Visioneer Strobe XP 300 instantly turns paper documents into distributable digital files and when powered through the USB port, can be used even when electrical power is not available, convenient and compatible. Imagine being able to scan receipts in your car, business cards on an airplane and work effortlessly in foreign countries.
Customer Reviews:
Sorry Visioneer, you just keep getting worse.......2007-11-18
I bought this scanner awhile back thinking it would save a bunch of time to be able to scan both sides of a page in one feed. Silly me. This is the worst PaperPort I ever owned. I have owned four over the years and kept hoping they would get even better. I eventually returned this POS.
I wish I had the first PaperPort I ever bought, which was terrific, but of course was not updated to work with XP. Visioneer, if you're going to force us to upgrade at least make the new scanner as good as the last. I've had the 100, 200 and 300 and all of them are problem-plagued. The 200 and 300 cut off the top 1/4 inch of your doc no matter what you do. Their auto-crop feature works about one in four scans with the result being that it cuts the right or left third of the page off. I just spent most of the day scanning with the strobe 200 and nearly lost my mind. I had to unplug and replug to get the scanner to be recognized. I had to reboot. Refeed. Straighten. Rescan. You get the picture. I am one PO'd owner.
On the plus side, I have always found the folks at Visioneer tech support to be some of the most honest and patient I have ever encountered. I feel sorry for them. I'll bet they want to ring their friggin's engineers' necks fifty times a day!
Will someone come out with portable sheetfed scanner that really works and actually saves time instead of creating massive headaches? I'll pay $300 for such a scanner, but it BETTER WORK!
Also Visioneer engineers and coders, how about releasing a finished driver for the Strobe 200? Vista's only been out ten months now. What the heck!
Is the manual wrong?.......2007-03-15
I'm really confused by the reviews here. I was thinking about buying this scanner a little while ago and was put off by all the negative reviews. However, today I found the manual at the Visioneer site and some of the complaints are addressed in the manual. Specifcally on page 119, it shows that the autoscan can be disabled, and if it is enabled the paper pickup delay can be adjusted. Are reviewers here saying that these features don't work, or are they simply unaware of the ability to choose these settings? Wish I knew!
Update: So I just got off the phone with tech support - because I can't stand unanswered questions - and the gentleman I spoke with was truly one of the most pleasant and helpful techies I've ever called. No joke. Definitely not the rude, indifferent people described in the other reviews! He informed me that you CAN in fact set the autostart delay if you want to. He said it was an issue when it was first released, but that it HAS been fixed. He also said that since the XP 300 is designed to be able to handle thicker items like driver's licenses, etc., that it does handle thinner items like receipts a little differently than the old scanners which were not designed to do this.
I loved my old strobe scanner, but as good as it was, even it could be finicky at times. It was a small price to pay for the convenience, though. Another thing to consider for those of you who have experienced connection issues or other weird behavior - CHECK THE CABLE. So often we blame the equipment and we forget the usb cables and the power cords we connect them with. They DO go bad! Back in the early 90's, our first computer was having numerous weird problems and I kept telling my husband to try a new power cord. He didn't listen, and kept trying more "likely" solutions. I finally convinced him we had nothing to lose by trying. New power cord, ALL the problems went away. I've run into this with power supplies, too. They weren't bad enough to quit, just bad enought to mess with things.
Worst function per $$ I can imagine.......2007-01-09
I am a long time Visioneer fan.
It started with my initial parallel-port attached STROBE, windows 98 (95?) and the SUPERB paperport desktop.
When the paperport (now Nuance) people offered a special on the Visioneer 300, I assumed (sigh) they had tested it and found it a good match.
NO!
1. The lack of insert delay is HORRIBLE as you can't get the stuff aligned before it grabs it.
2. the feed rollers are feeble. Any excuse to "skid" (not continue to scan in the paper) is a problem. When the paper leading edge hits the teeny resistance of the curve of the exit, (when trying to feed it back to you like my old paperport did - this one is totally unacceptable in only sending it out the back another inch higher), -or- when there is any input resistance - a slight down-fold in the paper (like every tri-fold sheet comes in the mail) then it again skids.
2a. I can even PUSH THE PAPER THROUGH THE FEED ROLLS, because they are so unbelievably feeble.
3. My $59 or so Canoscan LiDE 35 has a wonderful "text enhanced" mode, while the $300 or so XP300 doesn't.
I don't believe I have ever spent so much money for something as completely unusable for its designated purpose.
I am tempted to take it apart, and wrap some surgical rubber around its toy feeder wheels, so it will at least grab the paper. If I break it in the process then I will no longer have to be unhappy with it.
SHAME SHAME, Visioneer!!! This should never have made it out of development engineering prototype phase!
OH AND FINALLY, silly me, I thought since PaperPort is SO nice, they would, with the xp 300, become a "feed paper onto your virtual desktop", but alas, no, you have to push so many buttons, have to destack everything (since single scans are SO unproductive due to all the button pushing)... I've written some MacroExpress macros so alt-S scans and alt-D is done, but still...
So shame on paperport/nuance for not really trying it, and most of all shame on me for buying it without looking for reviews such as this one!
P.S. "Yay Amazon". Much of my Christmas shopping, etc. Great!
Worst scanner ever.......2006-09-29
The other reviewers basically summarize it all. I am going to return it. After complaining to the company about some problems their reply was: "You are right, these are known problems, no solution yet". Every new model gets worse. They have a great idea for a product but simply don't get it. Total idiots.
Design flaw acknowledged but no remedy offered !!!.......2006-04-05
DO NOT BUY THIS SCANNER. I have owned six Strobe scanners over the years with satisfactory performance until now.
This scanner has THREE problems that are all acknowledged by Technical Support, however Customer Service will not offer any remedy whatsoever. First, the Strobe scanners are designed to start scanning when paper is inserted. The Strobe XP300 is the FIRST Strobe scanner that does NOT allow the user to set a 'scan start delay time'. This was typically 0.8 seconds and allowed the user to insert the paper straight before the scan starts. The XP300, however, starts scanning immediately - before the paper begins to feed - and results in 1/2" to 1" of horizontal lines at the top of EVERY PAGE. Technical Support says Visioneer knows this is a problem, has been unable to come up with a fix, PLUS they tell me the ONLY remedy is to manually initiate every scan.
Second, the XP300 will not feed thin documents, such as receipts. Therefore, they include with the scanner two sizes of clear plastic document sleeves in which you are to place the thin sheets. Unfortunately, this does not work which is the THIRD problem - the scanner jams with the thickness of the document holders.
Feel free to call Technical Support (it's a toll call, by the way); they will acknowledge that the XP300 is their worst product and no one is satisfied. One has to wonder why it is still advertised as an AutoScan model when there is no way to obtain a quality scan.
Customer Reviews:
Speedy.......2007-09-19
I purchased this HD for my gaming rig. It's been outstanding. I haven't had a problem with lagging, or extended file access times since I installed it. It makes everything better, even making cd's and doing general tasks. The lack of space is the only downfall for the model I chose, but since it's strictly a gaming machine, and it hardly has any need for required space, it's perfect. The SATA connection is much faster, and easier to install, and it's a quiet drive, I can't hear it over my power supply fan, and it's internal. Any raptor is sure to give you worry free performance, and their customer service is outstanding!
Cheap Consumer Electronics:
- Switch 48-PORT 10/100MBPS Stck
- Targus PA360U Universal Auto/Air Adapter
- Tigerswitch 1000 24-PORT
- Truestyle
- TUCANO RETRACTABLE IN-EAR EARPHONES
- !Tude Illuminating Earphones - Aqua
- !Tude Illuminating Earphones - Pink
- !Tude Illuminating Earphones - Yellow
- Unwired Technology R2T-402 Dual Source Infrared Headphone Transmitter
- Video Splitter 2-PORT VGA Rohs
Cheap Consumer Electronics List
Cheap Consumer Electronics
Networking & Online Communication
|
Computer Add-Ons
|
Computers & Add-Ons
|
Categories
|
Electronics
|
Broadband Access
|
Telephony
|
Wired Networks
|
Wireless
