Product Description
Graduated 502 neutral density filter has a reduction of 2 f-stops due to its 25% transmission factor.
Customer Reviews:
No two B+W 502 filters have the same density and color!.......2007-10-16
B+W 501 and 502 graduated neutral density filters vary tremendously in color and density. They have a serious quality control problem.
My needs for 3D filming left me with no alternative but to find a matched pair of B+W 502 filters - it took three months to come up with a pair that had the same density and color and even then, they have a slight blue-green cast. It's next to impossible to find a B+W 502 that's actually grey (neutral) like it's supposed to be.
See my article with links to photos comparing multiple B+W 502 graduated neutral density filters in the Photo.net Large Format photography forum:
http://photo.net/bboard/q-and-a-fetch-msg?msg_id=00MfNR
If you are using a rangefinder or any other camera that does not allow you to examine the effect of the filter through the camera lens, there is unfortunately no alternative to the B+W 501 and 502 in a round, screw-in mount other than the Heliopan graduated ND filters, but these are ridiculously low in density for their rating. The Heliopan graduated ND filters are all but useless.
If you are using an SLR, DSLR, or some other design that allows you to look through the camera lens (such as a view camera with ground glass), you should seriously consider the use of a rectangular graduated ND filter in an ajustable holder (instead of a round screw-in filter). Have a look at those made by Singh Ray, Lee Filters, Formatt, or Schneider Optics. They are all offered in both hard and soft edge gradients - the soft edge gradients are best for wide angle lenses, hard edge for normal or telephoto lenses.
Mike
Quality Filter.......2007-04-09
I'm not going to get into why one would want this specific type of filter - there are books on the subject that will go into a lot more detail - here is one example - there are many: The Photographer's Guide to Filters (Photographers Guide).
I will comment on the other review here in that this filter works fine if you use it as it was designed to be used, in most cases its to filter down a bright sky and keep your exposure correct for the rest of the shot (landscape). It is a round filter, so yes, you are limited on some of the choices compared to external plate filters, but that doesn't mean this filter is a flop.
B+W filters are made in Germany. Germany is consistenly one of the best producers of high end glass and optics. I have been told the reason the quality of these filters is better than most is that they don't make them as separate units, but instead they build a cylinder of glass and cut each filter off of it. Consistent quality. Screw ring is hard metal, so it is very difficult to strip the threads. I have messed up the threads on cheaper brands by accident.
In my experience, buying filters falls into the category of you get what you pay for. Cheaper brands are out there, but if you want a very high quality filter, that is durable and consistent with what you want to achieve with it... you can't go wrong with B+W filters.
Be sure to choose the right size - for example, Nikon prints the size on the back of the lens cap.
Useless.......2007-01-09
Since the grad position is only adjustable in a circular motion verses an up and down motion it makes this filter virtually unusable as the pattern's darkness cannot be adjusted.
Product Description
Graduated 502 neutral density filter has a reduction of 2 f-stops due to its 25% transmission factor.
Customer Reviews:
Effective filter.......2007-12-18
I bought this filter to use to balance the sky with ground in landscape photos. It seems to work best in overcast conditions and keeps the sky and clouds from washing out in photos.
Product Description
The neutral gray coloring of one half of the filter has a transmission level of 50%. It is used to reproduce a part of the scene one f-stop darker than the rest.
Customer Reviews:
Out of Stock.......2007-06-13
Can't comment on the quality of the filter, I ordered it and after waiting a week I called. Then I'm told "sorry, it's out of stock" and they had no idea if they would get one in. Said they a called 5 dealers and Germany, nothing available. I would not have written a review but I see it's still listed as available. Beware.
Quality Filter.......2007-04-09
I'm not going to get into why one would want this specific type of filter - there are books on the subject that will go into a lot more detail - here is one example - there are many: The Photographer's Guide to Filters (Photographers Guide).
I will comment on the quality of this product. B+W filters are made in Germany. Germany is consistenly one of the best producers of high end glass and optics. I have been told the reason the quality of these filters is better than most is that they don't make them as separate units, but instead they build a cylinder of glass and cut each filter off of it. Consistent quality. Screw ring is hard metal, so it is very difficult to strip the threads. I have messed up the threads on cheaper brands by accident.
In my experience, buying filters falls into the category of you get what you pay for. Cheaper brands are out there, but if you want a very high quality filter, that is durable and consistent with what you want to achieve with it... you can't go wrong with B+W filters.
Be sure to choose the right size - for example, Nikon prints the size on the back of the lens cap.
Product Description
The neutral gray coloring of one half of the filter has a transmission level of 50%. It is used to reproduce a part of the scene one f-stop darker than the rest.
Customer Reviews:
Quality Filter.......2007-04-09
I'm not going to get into why one would want this specific type of filter - there are books on the subject that will go into a lot more detail - here is one example - there are many: The Photographer's Guide to Filters (Photographers Guide).
What I will review is quality of this product. B+W filters are made in Germany. Germany is consistenly one of the best producers of high end glass and optics. I have been told the reason the quality of these filters is better than most is that they don't make them as separate units, but instead they build a cylinder of glass and cut each filter off of it. Consistent quality. Screw ring is hard metal, so it is very difficult to strip the threads. I have messed up the threads on cheaper brands by accident.
In my experience, buying filters falls into the category of you get what you pay for. Cheaper brands are out there, but if you want a very high quality filter, that is durable and consistent with what you want to achieve with it... you can't go wrong with B+W filters.
Be sure to choose the right size - for example, Nikon prints the size on the back of the lens cap.
Product Description
Graduated 502 neutral density filter has a reduction of 2 f-stops due to its 25% transmission factor.
Customer Reviews:
B+W 502 filters are not consistent in color or density.......2007-11-06
B+W 501 and 502 graduated neutral density filters vary tremendously in color and density. They have a serious quality control problem.
My needs for 3D filming left me with no alternative but to find a matched pair of B+W 502 filters - it took three months to come up with a pair that had the same density and color and even then, they have a slight blue-green cast. It's next to impossible to find a B+W 502 that's actually grey (neutral) like it's supposed to be.
See my article with links to photos comparing multiple B+W 502 graduated neutral density filters in the Photo.net Large Format photography forum:
http://photo.net/bboard/q-and-a-fetch-msg?msg_id=00MfNR
If you are using a rangefinder or any other camera that does not allow you to examine the effect of the filter through the camera lens, there is unfortunately no alternative to the B+W 501 and 502 in a round, screw-in mount other than the Heliopan graduated ND filters, but these are ridiculously low in density for their rating. The Heliopan graduated ND filters are all but useless.
If you are using an SLR, DSLR, or some other design that allows you to look through the camera lens (such as a view camera with ground glass), you should seriously consider the use of a rectangular graduated ND filter in an adjustable holder (instead of a round screw-in filter). Have a look at those made by Singh Ray, Lee Filters, Formatt, or Schneider Optics. They are all offered in both hard and soft edge gradients - the soft edge gradients are best for wide angle lenses, hard edge for normal or telephoto lenses.
Mike
Quality Filter.......2007-04-09
I'm not going to get into why one would want this specific type of filter - there are books on the subject that will go into a lot more detail - here is one example - there are many: The Photographer's Guide to Filters (Photographers Guide).
What I will review is quality of this product. B+W filters are made in Germany. Germany is consistenly one of the best producers of high end glass and optics. I have been told the reason the quality of these filters is better than most is that they don't make them as separate units, but instead they build a cylinder of glass and cut each filter off of it. Consistent quality. Screw ring is hard metal, so it is very difficult to strip the threads. I have messed up the threads on cheaper brands by accident.
In my experience, buying filters falls into the category of you get what you pay for. Cheaper brands are out there, but if you want a very high quality filter, that is durable and consistent with what you want to achieve with it... you can't go wrong with B+W filters.
Be sure to choose the right size - for example, Nikon prints the size on the back of the lens cap.
Product Description
Graduated 502 neutral density filter has a reduction of 2 f-stops due to its 25% transmission factor.
Customer Reviews:
B+W 502 filters are not consistent in color or density.......2007-11-06
B+W 501 and 502 graduated neutral density filters vary tremendously in color and density. They have a serious quality control problem.
My needs for 3D filming left me with no alternative but to find a matched pair of B+W 502 filters - it took three months to come up with a pair that had the same density and color and even then, they have a slight blue-green cast. It's next to impossible to find a B+W 502 that's actually grey (neutral) like it's supposed to be.
[...]
If you are using a rangefinder or any other camera that does not allow you to examine the effect of the filter through the camera lens, there is unfortunately no alternative to the B+W 501 and 502 in a round, screw-in mount other than the Heliopan graduated ND filters, but these are ridiculously low in density for their rating. The Heliopan graduated ND filters are all but useless.
If you are using an SLR, DSLR, or some other design that allows you to look through the camera lens (such as a view camera with ground glass), you should seriously consider the use of a rectangular graduated ND filter in an ajustable holder (instead of a round screw-in filter). Have a look at those made by Singh Ray, Lee Filters, Formatt, or Schneider Optics. They are all offered in both hard and soft edge gradients - the soft edge gradients are best for wide angle lenses, hard edge for normal or telephoto lenses.
Mike
Product Description
Graduated 502 neutral density filter has a reduction of 2 f-stops due to its 25% transmission factor.
Product Description
Graduated 502 neutral density filter has a reduction of 2 f-stops due to its 25% transmission factor.
Cheap Consumer Electronics:
- Hi-Capacity Camcorder Battery for: Canon Elura 2MC
- Hi-Capacity Camcorder Battery for: Canon IXY DV 2
- Hi-Capacity Camcorder Battery for: Chinon C8-SC96
- Hi-Capacity Camcorder Battery for: Fisher FVP-201
- Hi-Capacity Camcorder Battery for: GE 2120
- Hi-Capacity Camcorder Battery for: Hitachi DZ-GX20A
- Hi-Capacity Camcorder Battery for: Hitachi DZ-MV350A
- Hi-Capacity Camcorder Battery for: JC Penney 686-5600
- Hi-Capacity Camcorder Battery for: JC Penney 686-6204
- Hi-Capacity Camcorder Battery for: JVC GR-D230
Cheap Consumer Electronics List
Cheap Consumer Electronics